What is Safety Week?

Construction Safety Week started in 2014 with 40 national and global construction firms from the Construction Industry Safety Initiative (CISI) group and the Incident and Injury Free (IIF) CEO Forum. The goal is to inspire everyone in the industry to be leaders in safety by sticking to the following guidelines:
• Thank workers for supporting safety and recognizing their efforts to be injury-free
• Increase awareness of the importance of being committed to safety, every day
• Encourage everyone to share best practices and to work together to strengthen the industry’s safety culture
• Conduct onsite safety awareness activities to support education

Safety Week aims to strengthen the industry’s safety culture and performance by sharing best practices, tools and resources.

Connected. Supported. Safe.

This year, the Construction Safety Week forum theme is “Connected. Supported. Safe.” Being connected gives workers a collective sense of strength because they are building a stronger, more robust, safer industry together. Supported means fellow colleagues are helping each other stay present and focused on the job, regardless of the role or workplace setting. It means the industry as a whole is equipped with the resources and support they need to work safely every day. Safety is a priority and obligation for all frontline workers. It is a shared responsibility to look after the well-being and safety of everyone on every jobsite, which empowers everyone to do their best work and return home safely every day.

Fall Protection: A Top Priority

The OSHA National Safety Stand-Down to Prevent Falls in Construction will also be held during this same week, raising fall hazard awareness across the country to stop fall fatalities and injuries. Falls are the top cause of construction fatalities and account for one-third of on-the-job injury deaths in the industry. Each year in the U.S., more than 200 construction workers are killed, and over 10,000 are seriously injured by falls.

RK and HSE Department Promote Safety Week

RK, under the direction of the HSE Department, is participating in Construction Safety Week by focusing on fall prevention and onsite safety across all business units. The goal of this week is to build up awareness to prevent fall injuries from roofs, ladders and leading edges by
encouraging every RK employee to:
• PLAN ahead to get the job done safely.
• UTILIZE safety resources when planning.
• PROVIDE the right equipment.
• TRAIN everyone to use the equipment safely.

Construction Safety Week allows the industry to reengage workers to remember the importance of safety. Each year there is a theme or specific topic, however, safety must be practiced everyday. The Focus Four are four leading hazards in the construction industry: falls, caught in or between, struck by, or electrocution. Being trained and recognizing these hazards can help prevent work-related accidents and possible fatalities.

RK’s number one core value is safety and empowers employees to take responsibility for their safety and for those working alongside them. The company’s number one priority is always ZERO injuries.

RK is proud to be accredited as an OSHA VPP Star Worksite and OSHA VPP Star Mobile Workforce, ranking in the 0.03% of U.S. companies with VPP certification at any level and as the 53rd U.S. company to earn Star Mobile Workforce status.

Written by Ileana Morales

Connected.Supported.Safe., accessed April 28, 2022, Construction Safety Week

Construction Focus Four Training, accessed April 28, 2022, OSHA

National Stand-Down to Prevent Falls in Construction, accessed April 28, 2022, OSHA

Voluntary Protection Programs, accessed April 28, 2022, OSHA

By: RK Mechanical

The healthcare field is vast and frequently progressing. As death rates decrease and life expectancy increases, people are living longer creating a demand for new and updated healthcare facilities. Thankfully, prefabrication has allowed healthcare facilities of all sizes to be built in record time.

According to The 2015 SmartMarket Report on Prefabrication and Modularization published by McGraw-Hill Construction, contractors believe that prefabrication can decrease project schedules by four weeks or more. In addition, 65 percent of contractors believe that prefabrication leads to a decrease in budget and, because of that, more than 49 percent of healthcare projects now incorporate prefabrication.

Mechanical contractors are capitalizing on this approach and are experiencing great success. Prefabrication has proved to increase efficiency through less wasted material and improve the speed of construction. Repetitive processes lead to consistency and fewer mistakes, leading to better quality products. Prefabricated mechanical systems, specific to healthcare facilities, include bathroom components or whole bathroom pods, MEP racks, wall systems and exterior elements. As prefabrication advances, new applications include modular mechanical rooms and patient and exam rooms.

Prefabrication creates safer working environments for employees. Prefabricating mechanical systems in a controlled environment means that as little as 20 percent of work is done on-site, reducing health and safety risks. And, more than one third of McGraw-Hill survey respondents using the approach say they have seen safety improve company-wide. Weather is not an issue and ladders and platforms are rarely needed. Fabrication in a warehouse and installation onsite allows multiple construction activities to be performed in parallel. According to a recent article published by Sourceable, between 60 and 90 percent of the prefabricated portions of healthcare facilities are assembled off-site.

Prefabrication is essential for operational facilities. Construction crews are able to perform work and install systems with less congestion and disturbance to facility employees and patients. Cutting down the construction schedule is also a key benefit because the sooner construction is finished the sooner they can expand the amount of care that they are able to give.

RK Mechanical has extensive experience working in the healthcare industry prefabricating and installing mechanical systems for projects including:

Looking to build or renovate a healthcare facility?  RK Mechanical would be happy to discuss our services with you. Contact RK Mechanical at communications@rkindustries.com for more information.

By: RK Mechanical

After the recent OSHA VPP audit on November 14th, RK was thrilled to be recommended for the OSHA VPP Star, OSHA’s highest award for world-class safety and health! During the three day audit, conducted by two OSHA auditors and a special government employee from Raytheon, 35 different employees were interviewed and after the evaluations were complete, RK received the a recommendation for the designation that less than 0.03% of companies in the entire nation receive. That means that only 62 contracting companies in the U.S. and three in Colorado are designated with this esteemed rating!

So, what does this mean?

The Occupational Safety and Health Administration (OSHA) recognizes the value of co-operative efforts by employers, employees, and government agencies to reduce hazards and strengthen worker protection. Created in 1982, The Voluntary Protection Programs (VPP) recognize employers and employees who have established effective safety and health management programs. The VPP program has been particularly successful in increasing safety in many different industries, including construction, poultry processing, petrochemical plants, tree nurseries, nursing homes, federal laboratories, and even “mom and pop” operations.

The OSHA audit itself, a two-phased, on-site evaluation, is highly complex and painstakingly done. In the first phase, OSHA’s team reviews the applicant’s corporate, division or business unit policies and procedures, including a review of safety and health management programs, document review and assessment of the management commitment to safety and health, and to VPP itself.

The intense road to Star status was been an intense one that took a while. “Shortly after achieving our OSHA VPP Star Mobile Work Force accreditation for the field, we asked the shop employees if they wanted to achieve this for the shops as well. The resounding response was yes,” said JP Kennel, Operations Manager for the Xanthia facility. “We began preparation, but along the way, we found that many of the things we already did were [already in place to satisfy] the OSHA VPP Star requirements. We still had to make numerous tweaks to our processes and procedures, though, and we learned a lot about ourselves [in the process]. Stepping back and critically looking at ourselves [allowed us to see] that we were lacking in mitigating possible hazards to our employees. These were the areas we focused on, making great strides in providing a safer and healthier work environment.”

Lindsay Kalis, QSE Systems Manager and main OSHA contact for RK, was the one behind the implementation of the safety management system, and was responsible for everything from application to scheduling while the OSHA team was on-site.

Kalis elaborated on what the audit consisted of while the OSHA team was at RK. “There are two types of VPP certification – Mobile Workforce and Worksite. This audit was for the Xanthia location (the Worksite designation) and Henderson will have theirs next.” Kalis explained that the application for the Xanthia audit was originally submitted in January 2013, but it took a year and a half to get the audit done.

Typically, it takes three months for the application to go through, but in light of the government shutdown and budget restrictions, it took much longer than was originally expected. Along with Kalis, Tom Alvarez, RK’s Manager of Safety, was also instrumental in assisting the OSHA auditors find all of the information they needed.

The second phase is dedicated to reviewing one or more worksites in order to verify that the safety and health management programs are actually functioning outside of the home office, which will take place when the Henderson site is audited.

The Star designation is specifically designed for “exemplary worksites that have implemented comprehensive, successful safety and health management systems; and achieved illness/injury rates below their industry’s national average”. “Our recommendation for the Star Level clearly demonstrates our commitment to the safety of all our team and the passion we have with regard to being a World Class company,” said Ian Welsh, Vice President of Corporate Development.

Not only is this a great boon for the company, but it also helps to enrich the lives of RK workers on a personal level as well. JP Kennel said it best. “Safety and health has to be a part of what we do every day. In order for that to happen, the rules and regulations have to be backed from the officer level on down. That way, the employee truly knows they have the power to communicate when they see an unsafe situation, but more importantly, they know that the company truly cares about them and their family.”